ReachView app
Reach RS+ comes with a cross-platform app. It is hosted on Reach itself and accessed via Wi-Fi connection on any smartphone, tablet or laptop. For the best experience get it’s mobile version for iOS or Android.
ReachView app
Reach RS+ comes with a free cross-platform app. It is hosted on Reach itself and accessed via Wi-Fi connection on any smartphone, tablet or laptop. For the best experience get it’s downloadable version for iOS or Android.
Collect and stakeout points
With Reach RS+ and ReachView you can create survey projects to manage data collection. When working in the field each point is assigned a custom name and offset. Results can be downloaded from the project list.
1 cm
Precision
8 GB
Storage
File formats: DXF, GeoJSON, ESRI Shapefile and CSV.
Use Reach RS+ as a base station
Use Reach RS+ to set up your own base station. Stream corrections over the network via NTRIP/TCP or LoRa radio. Record base logs for post-processing.
868/915 MHz
LoRa radio
Up to 8 km
Reliable corrections
File formats: RTCM3, RINEX.
Receive corrections data over the Internet
You won’t always need to set up your own base station. Standalone Reach RS+ can receive corrections data over the Internet from your local NTRIP provider. No special devices or software are required, all you need is a smartphone.
File formats: RTCM3, RINEX. VRS supported.
Machinery guidance
Reach RS+ is able to provide precise coordinates over Bluetooth/Wi-Fi to your tablet with a lightbar navigation app. RS232 interface allows to connect Reach RS directly to an autosteer system.
File formats: NMEA, ERB, plain text
Compatible apps: MachineryGuide, AgriBus-Navi, Efarmer
Protected from water, dust and falling
And it floats, so you don’t have to worry you might lose it in a middle of a lake
-20С…+65С
-4F…149F
IP67
Water- and dustproof
690 g
1,52 lbs
145 x 145 x 85 mm
5,7 x 5,7 x 3,3 inches
Protected from water, dust and falling
And it floats, so you don’t have to worry you might lose it in a middle of a lake
-20С…+65С
-4F…149F
IP67
Water- and dustproof
690 g
1,52 lbs
145 x 145 x 85 mm
5,7 x 5,7 x 3,3 inches
Ready to work right out of the box
Comes with a hard carry case, radio antenna, thread adapter and USB cable.
1 Fix it on a rod/tripod and connect the radio antenna.
2 Hold the power button for 3 seconds to turn Reach RS on.
3 Connect to your Reach RS and open the ReachView app.
4 Configure the Rover-Base connection.
And you’re ready!
Specifications
Mechanical
- Size: 145 x 145 x 85 mm
- Weight: 690 g
- Operating tº: -20…+65ºC
-
Ingress protection:
IP67 (water
and dustproof)
Electrical
- Battery life: 30 hours
- Charging port: MicroUSB 5V
- External power input: 5-40V
- Certifications: FCC, CE
Positioning
- Static horizontal: 5 mm + 1 ppm
- Static vertical: 10 mm + 2 ppm
- Kinematic horizontal: 7 mm + 1 ppm
- Kinematic vertical: 14 mm + 2 ppm
Connectivity
- Radio: LoRa 868/915 MHz
- Wi-Fi: 802.11a/b/g/n
- Bluetooth: 4.0/2.1 EDR
- Interfaces: USB, RS232, PPS, Event
Data
- Internal storage: 2 GB
- Correction input: RTCM2, RTCM3
- Solution output: NMEA, ERB, plain text
- Logs: RINEX2.X, RINEX3.X
GNSS
-
Signals:
GPS/QZSS L1, GLONASS G1,
BeiDou B1, Galileo E1, SBAS - Tracking channels: 72
- IMU: 9DOF
- Update rate: 14 Hz / 5 Hz
FAQ
What are the required operating conditions?
RTK positioning uses signals coming from space and Reach RS+ has to be placed outside with clear sky view. Highest precision is obtained in low multipath conditions and with calm ionosphere.
Can Reach RS+ act both as base station and rover?
Yes, it can work in base and rover modes simultaneously.
Does Reach RS+ work with Reach module?
They work perfectly together! Reach RS+ can be used as base station for Reach module installed in a drone.
Do I need 2 Reach RS+ units and how do they communicate?
Precise positioning is achieved by using two receivers. They could produce solution in real-time (RTK) or collect raw phase measurement data for post-processing (PPK). Only in the first case constant communication between rover and base is required, you can use radio, Wi-Fi or internet connection depending on your usage scenario.
Can I use it in pair with another RTK receiver?
Definitely! Thanks to use of RTCM3 and RINEX formats Reach RS+ is compatible with existing RTK receivers from major brands as well as with reference networks worldwide.
What is the maximum distance between base and rover units?
For solid performance in kinematic mode we recommend separation distance (baseline) up to 10km, in static mode up to 20km. Baseline could be increased even further depending on local conditions.
How many rovers can I use with one base station?
Corrections from the Reach RS+ configured as a base can be broadcasted to an unlimited number of rovers.
Is Reach RS+ compatible with Reach RS?
Yes, they are fully interoperable. You can have a fleet of mixed devices and use them in any combination you need.
